1. Preparation before construction:
1. Personnel training and protection: Operators must undergo professional training and be familiar with the operation methods, performance and safety regulations of the paver. Before construction, wear personal protective equipment such as safety helmets, protective glasses, earplugs, protective gloves, etc. to protect your own safety.
2. Equipment inspection: Before starting the paver, carefully check whether the engine, hydraulic system, brake system, tires, scraper conveyor, spiral distributor, ironing board and other components are intact, ensure that all components are operating normally, the connection is tight, and there is no looseness, leakage and other problems; check the instrument panel to confirm that the display of each instrument is normal, the switch and the operating gear are in the correct position; at the same time, check whether the fuel, lubricating oil, hydraulic oil, etc. are sufficient.
3. Site cleaning: Clean the work site before construction, remove all obstacles that hinder work, ensure a wide field of vision on the site, and avoid collisions between the paver and obstacles during driving or operation.
2. Operation during construction:
1. Driving safety:

Keep stable during driving, avoid sudden acceleration, deceleration or sharp turns, and prevent the paver from losing balance or rolling over. When working on a curve, control the speed and steering angle to ensure that the distance between the end of the ironing device and the curb is not less than 100mm to avoid collision.
2. Operation safety:

It is strictly forbidden to stand on the ironing plate at will, and non-operating personnel are not allowed to climb the paver to avoid accidents such as people falling.


3. Equipment maintenance and adjustment:
When performing equipment maintenance, inspection or adjustment, the machine must be stopped first, the engine must be turned off, and the power supply must be cut off to ensure that the equipment is in a safe state to prevent accidental start-up. For example, when replacing parts, clearing blockages, etc., this regulation must be strictly followed.

4. Finishing work after construction:


Set up warning signs around the paver to remind passers-by and vehicles to pay attention to safety and avoid collision accidents.